1 of 1 090302 features programs eeprom to set frequency and operating modes supports dallas prog rammable oscillator family ds1075 ds1075-ind ds1073 ds1065 operates with a pc-compatible host system easy windows installation (win95 or higher) demonstrates ? ease of programming frequency changes through the prescaler and divider ? reference choices, internal-external-crystal oscillator ? power-down mode ? output enable/disable kit contents 1. 1 pc. program/eva luation pc board 2. 1 pc. 3.5 floppy disk with software 3. samples (300mil dip) ? 2 ds1075m-060 ? 2 ds1075m-066 ? 2 ds1075m-080 ? 2 ds1075m-100 ds1075 programming/evaluation kit equipment needed to use the DS1075K, you will need: 1. an ibm-compatible pc running microsoft windows 95 with a 3.5 floppy drive and an available serial port 2. a 5v power supply with suitable connectors to fit the banana jacks on the pc board 3. a rs232 cable with db25 connector to connect from the pc serial port to the kit description the DS1075K programming/evaluation kit makes pr ogramming and performance evaluation of the dallas oscillator product line easy. it contains everything needed to program the dallas programmable oscillators; with this kit the user can change the register setting that controls the mode of operation and the divide-by number for the sele ction of output frequency desired. the kit makes programming as easy and fast as a ?click of the mouse,? and you have changed the eeprom register setting that controls the frequency selection and operation mode. programming of 8- pin dip part is supported in the kit. an so sock et (enplas ots-8) is re quired to program 8-pin so parts. for more information contact: application support (972) 371-4289 or fax (972) 371-4799 marketing support (972) 371-6001 DS1075K oscillator programming/ evaluation kit www.maxim-ic.com
|
